Geotextile solutions? What is meant by this solution? For some people, this term may be unfamiliar. It should be realized that most of Indonesia’s territory consists of soft soil. Especially in Sumatra and Kalimantan. Meanwhile, one of the problems that often occur in soft soils is low bearing capacity and high settlement.

Not only that, but this geotextile solution also has a function for land preparation construction, making it difficult for heavy equipment to stand on the soft soil. Apart from being a problem, it is also a challenge. Usually heavy equipment that cannot stand or be lifted because the ground is soft. Making heavy equipment such as excavators sink. Thus it needs a base that can be the seat of the heavy equipment.

The use of the pedestal also helps to prepare the land so that it can run quickly and smoothly. Usually many people choose to use a geotextile solution. It is a layer of separation between the subgrade and the embankment. The designation of the base is non-woven geotextile or woven geotextile. However, its use also depends on the type of soil base and the construction that will be built on it.

Geotextile Solutions

waterproofingbali.id

Profitable Geotextile Solutions

In general, road construction using geotextile solutions can not only be used as a separation layer. But it also serves to distribute the load to a wider area. Geotextile itself is one of the materials commonly used in the geotechnical field. From the language alone, you can see it, right? There is the word “Geo” then “textile”. It has a meaning as a textile material that functions in soil for certain geotechnical purposes.

It is said to be a profitable solution because its functions are also very diverse. Previously it was said that the geotextile solution functions as a separation. Or it could also be used as reinforcement. Regarding its application, it can also be carried out on various slopes or embankments. Before doing the installation There is nothing wrong if you know what the proper installation looks like and the function of the geotextile class itself.

For a woven geotextile solution, it is a sheet of geosynthetic material. Usually these sheets are made of synthetic fibers by woven or woven. The term woven itself means “to weave”. The advantage of this woven class is that there is additional protection against UV rays. Not only that but this geosynthetic sheet also has very high tensile strength. So that it can be relied upon to overcome the problem of soft soil improvement.

Non Woven

Another benefit of using Woven geotextile solutions can be for making roads or embankments on soft soils such as swamps. For use in soft soils, woven geotextiles utilize a very high tensile strength compared to non-woven geotextiles. Not only can it function to add stability to piles on soft soil. But for this woven it can also equalize the decrease.

Then for non-woven geotextile solutions are geosynthetic materials made without using the woven method. There is a lengthy process to produce a sheet of high quality non woven geotextile. Need bonding and interlocking technology or a combination of the two technologies. So that later the process of unifying a collection of fibers can be regular. The use of non-woven geotextiles is also very diverse. But usually we can also find it in everyday life.

Generally, non-woven geotextile solutions are used for separators and filters in projects related to geotechnical engineering. For non-wovens, it also has a slightly low tensile strength but high elongation. This shows that non woven is not suitable for use as reinforcement. More precisely suitable for use as a separation or protection can also be filtration.

Stabilizer

Utilization of geotextile solutions can also be used as stabilizers. For this one function it is usually also determined based on the bearing capacity of the subgrade. The CPR value or shear strength will also be used as a bearing capacity parameter. For the method of applying the solution to textiles, one must first prepare the subgrade and then roll it out without any wrinkles or not dragging it.

After that the geotextile joining and new spreading The last step is compaction. Avoid installing the Geotextile solutions by dragging. Make sure to roll out the material with the direction of the machine perpendicular. For more information about Geotextile supplier near me please contact: Whatsapp/Mobile Phone : +62 811 1721 338 (Ais), +62 811 9151 338 (Anna), +62 811-8805-538 (Davy) or Email : info@urbanplastic.id.