Finding the best geogrid for roads is not easy, but it is not difficult either. You should understand some points to pick the right products based on your needs.
Road maintenance is maintenance and repair. The aim is to make road conditions can be used according to their capacity. To find out the meaning, type, and purpose of these activities, see more information below.
It is important for you who want to do this activity for your further project. Geogrid can be the right material to use since it has a supportive characteristic for soil.
Definition of Road Maintenance
Road maintenance commonly also called road preservation is a handling activity, in the form of prevention, maintenance, and repair. It is needed to maintain the track conditions to function optimally.
So that the highway handling activities can guarantee as well as serve vehicle traffic according to the age of the set plan can be achieved. Road preservation must be done periodically.
It will ensure that the quality of the track is maintained and functions properly when passed by users. Geogrid for roads is a technique that has been known for many years.
For information, the damage in many countries is generally caused by soft soil conditions and high rainfall. To overcome this problem, there are several kinds of literature and research on the use of various types of Geosynthetics.
These are Geotextile, Geomembrane, Geogrid, and Geocell. It is needed for soil stabilization and reinforcement in road construction.
What is Geogrid For Roads
This item is a raft-shaped sheet with holes spread on top of the base soil to create a stronger soil structure. Geogrids function more as reinforcement or reinforcement.
They do not have properties in geotextile materials such as separators, drainage, filtration, and water barriers. Below are some details about this geogrid for roads.
1. 2 Different Components
There are two components involved in the stress transfer mechanism on the geogrid for roads. These are the horizontal ground friction on the grid surface and passive resistance (horizontal ground support) against the transverse part of the grid
This product is an ideal reinforcement layer to hold the stability of soil structures or aggregates. That is why; it is widely used in the construction of slopes and cliffs that have a sharp slope.
2. Made from 3 Materials
By using a geogrid, lateral resistance will be increased so as to allow the stockpiled soil to be compacted with a higher level of density. Usually, this layer is used as retaining walls, subbases, or subsoils under a road or a building.
Because the geogrid for roads is made from basic materials in the form of Polypropylene, Polyethylene, and Polyester, geogrids have greater rigid properties compared to geotextiles.
Using the Interlocking Mechanism
Well, this stiffness property is an important factor in a pavement structure. This is because the soft soil will receive pressure or compressive force from the load on it.
The working mechanism of this item can be seen from the occurrence of interlocking mechanisms between granular stockpiles and geogrids. The use of Polyester Geogrids on highways where it can be used on roads without pavement.
It is more for the reinforcement of soft foundation soil. The geogrid for roads is also suitable for roads with pavement (installed on the foundation layer / crushed stone base course).
For more information about Geogrid please contact: Whatsapp/Mobile Phone: +62 822 9933 3938 (Ms. Panni) or Email : info@urbanplastic.id.