Geotextile installation need to understand each stage. Geotextiles are porous materials used in various civil engineering projects. Materials that strengthen, protect, or separate layers of soil or other construction materials.

Its installation becomes a crucial stage in projects. This is because errors in installation can have a negative impact on overall project performance. For that, there are a number of things you need to pay attention to in the geotextile installation.

Geotextile Installation, Know The Important Things Before Doing

Geotextile Installation Through Several Stages

Geotextile installation is an important component in the world of construction and civil engineering. Geotextile as a textile material that has porosity properties. Usually made of synthetic fibers such as polypropylene, polyester, and polyethylene. The functions of geotextiles are diverse. Each of its types to suit your needs.

Its significant benefits make geotextile one of the irreplaceable materials. Especially in ensuring the success of the construction project as a whole. There are several things that you need to pay attention to before geotextiles installation, as follows.

Selection of the Right Type of Geotextile

Selection of the type of geotextile that suits the needs of the project is very important. There are various types of geotextile installation, including separation geotextiles, reinforcement geotextiles, and filter geotextiles. Each type has specific characteristics suitable for certain applications. Be sure to understand the project requirements and consult a geotechnical expert to select the most appropriate type.

Surface Preparation

Prior to the installation of geotextile, the surface of the ground or structure must be cleaned of excess material. For example, such as stones, roots, or other sharp objects. The surface must also be level and free from excessive standing water. Because, this can interfere with installation and performance.

Control of Wrinkles and Creases

Geotextiles that are too wrinkled or folded can reduce their effectiveness and even cause long-term damage. Make sure the geotextile installation lies flat and has no significant wrinkles. Creases should be avoided as much as possible. But if needed, make sure it is located in a part that is not too burdened.

Binding and Containment

Geotextile installation must involve strong binding at certain points to prevent movement or shifting. So it can be done using retainers or special nails designed to work with geotextiles.

Overlapping and Closing

Subsequent installation of geotextile, if more than one sheet of geotextile is used. Be sure to have adequate overlap between the sheets. The overlap helps prevent gaps and aids in more even distribution of the load. When covering the geotextile with other materials, be sure to secure the geotextile. So it is not shifted when other material is spilled on it.

Care and Protection During Construction

During the construction phase, geotextiles are susceptible to damage by heavy materials and equipment moving over them. Be sure to protect the geotextile installation with a suitable additional layer to avoid unwanted damage.

Supervision and Examination

It is recommended that the geotextile installation be carried out under the supervision of a geotechnical specialist or an experienced professional. Perform periodic checks during the installation process. Doing so will help identify problems early and take appropriate corrective action.

Geotextile installation plays an important role in ensuring the success of civil engineering projects. Taking into account the above factors and following the guidelines set by the geotextile manufacturer and geotechnical specialists. You can ensure that the geotextile works as it should for the long term. For more information about Geotextile supplier near me please contact: Whatsapp/Mobile Phone : +62 811 1721 338 (Ais), +62 811 9151 338 (Anna), +62 811-8805-538 (Davy) or Email :